Integrated circuit design of buck boost DC to DC converter using pulse frequency modulator using Synopsys
Date of Publication
2012
Document Type
Bachelor's Thesis
Degree Name
Bachelor of Science in Electronics and Communications Engineering
College
Gokongwei College of Engineering
Department/Unit
Electronics and Communications Engineering
Thesis Adviser
Miguel O. Gutierrez
Defense Panel Chair
Ann E. Dulay
Defense Panel Member
Alexander C. Abad
Gerald P. Arada
Abstract/Summary
This paper is a design of a buck - boost converter using 90 nm library being run in the software Synopsys. The circuit design will consist of the buck - boost converter and the oscillator. The buck - boost converter serves as the main circuit of the system while the oscillator serves as the control of the system since its duty cycle and frequency determines the behavior of the circuit - it will trigger the stepping down and stepping up of voltages. Pulse frequency modulation will also be implemented through the oscillator since PFM is said to work at low load condition while the system is in standby mode.
Abstract Format
html
Language
English
Format
Accession Number
TU16899
Shelf Location
Archives, The Learning Commons, 12F, Henry Sy Sr. Hall
Physical Description
95 [182]: ill. (some cols.) ; 28 cm.
Recommended Citation
Elauria, M. R., Gatus, E. B., Giron, P. L., & Lim, D. M. (2012). Integrated circuit design of buck boost DC to DC converter using pulse frequency modulator using Synopsys. Retrieved from https://animorepository.dlsu.edu.ph/etd_bachelors/14832
