A computer program for the reduction of rebar waste in construction projects.
Date of Publication
2001
Document Type
Bachelor's Thesis
Degree Name
Bachelor of Science in Civil Engineering
Subject Categories
Civil Engineering
College
Gokongwei College of Engineering
Department/Unit
Civil Engineering
Abstract/Summary
The amount of rebar waste is already known even during the preparation of a bar bending and cutting list. The waste produced is due to the limited number of available commercial lengths. Because of this the preparation of a bar cutting list is made difficult because of the number of possibilities one could come up with in trying to obtain the required length from the available commercial lengths. And with each combination there is a corresponding amount of waste.
A survey was conducted to know how civil engineers prepare their bar cutting and bending list. Part of the survey showed that majority of engineers have not encountered computer programs that could help them in preparing this said task. The survey also noted how the respondents of the survey thought of using a computer program in their preparation of a bar cutting list.
Based on the survey a computer program was developed to help engineers in their preparation of a bar cutting list. Because of the computer program's ability to look into most of the possible combination it could then select the one, which could yield the least amount of waste.
Abstract Format
html
Language
English
Format
Accession Number
TU10504
Shelf Location
Archives, The Learning Commons, 12F, Henry Sy Sr. Hall
Physical Description
49 numb. leaves ; Computer print-out (photocopy).
Keywords
Radioactive waste disposal.
Recommended Citation
Salazar, E., Teodoro, G., & Hao, G. (2001). A computer program for the reduction of rebar waste in construction projects.. Retrieved from https://animorepository.dlsu.edu.ph/etd_bachelors/10292