Compressive strength optimization of concrete mixed with waste ceramics and fly ash

College

Gokongwei College of Engineering

Department/Unit

Civil Engineering

Document Type

Article

Source Title

International Journal of GEOMATE

Volume

16

Issue

53

First Page

135

Last Page

140

Publication Date

1-1-2019

Abstract

Waste utilization has been one of the most vital aspects in the construction industry towards sustainability. It addresses the dilemmas that waste disposals face specifically the non-biodegradable materials such as damaged ceramics and industrial byproducts like fly ash. Recent studies have shown that damaged ceramics and fly ash obtain physical properties that are similar to the conventional aggregates of concrete and cement, respectively. In this study, experimental procedures were conducted to evaluate the compressive strength of concrete mixed with varying amount of fly ash and waste ceramics following the compressive strength test stipulated under ASTM C 39. Furthermore, strength development was also accounted through subjecting the concrete specimens to different curing periods. Response Surface Methodology (RSM) was used to provide the optimum combination of fly ash and waste ceramics that produces the most desirable compressive strength. The optimization results indicated that the optimum combination of waste ceramic tiles and fly ash replacements was 75% and 25% substitutions, respectively. This combination attains the maximum nominal compressive strength of 37.188 MPa. Similarly, the resulting Response Surface Methodology (RSM) model was validated to ensure that the model is acceptable. © Int. J. of GEOMATE.

html

Digitial Object Identifier (DOI)

10.21660/2019.53.14268

Disciplines

Civil Engineering

Keywords

Aggregates (Building materials)--Testing; Ceramics; Fly ash; Waste products as building materials; Concrete

Upload File

wf_no

This document is currently not available here.

Share

COinS