Chitosan crosslinked with citric acid (CS-CA)/multi-walled carbon nanotubes (MWCNTs) as a multifunctional coating for different substrates
Date of Publication
9-2026
Document Type
Bachelor's Thesis
Degree Name
Bachelor of Science in Chemistry
Subject Categories
Chemistry
College
College of Science
Department/Unit
Chemistry
Thesis Advisor
Jose Paolo O. Bantang
Defense Panel Member
Eiza S. Florentino
Gil Nonato C. Santos
Abstract (English)
Multiwalled carbon nanotubes (MWCNTs) are tubular graphitic materials with exceptional mechanical, thermal, and electrical properties. In this study, a chitosan-citric acid (CS-CA) polymer matrix incorporating varying MWCNT concentrations (0%, 0.05%, 0.5%, and 5% w/v) was developed to investigate the effect of MWCNT loading on the physicochemical properties and performance of nanocomposite films and coatings. Dispersion and stability were assessed through visual inspection and ultraviolet-visible (UV-Vis) spectrophotometry. While the 0.05% MWCNT solution exhibited agglomeration over time, it was able to form a homogeneous and intact film upon drying. In contrast, the 0.5% solution remained well-dispersed and stable, while the 5% formulation produced a dense, brittle, and electrode-like block, suggesting potential application as a glassy carbon electrode alternative. The resulting films and coated cotton fabrics were characterized using infrared spectroscopy (ATR-FTIR), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDX), and water contact angle (WCA) measurements, which confirmed the successful incorporation of MWCNTs and revealed concentration-dependent morphological changes. Electromagnetic interference (EMI) shielding effectiveness of the coated cotton fabrics was evaluated using a Vector Network Analyzer (VNA) over a frequency range of 10 MHz to 2 GHz. Washing durability tests demonstrated approximately 80% mass retention after repeated wash cycles, indicating robust coating adhesion. All in all, this study demonstrates the potential of CS-CA/MWCNT nanocomposites as sustainable, biocompatible materials prepared via a one-step dissolution and crosslinking procedure of chitosan using citric acid. These findings highlight the importance of optimizing MWCNT concentration and dispersion quality to achieve desired material properties, while also providing recommendations for future process refinement.
Abstract Format
html
Abstract (Filipino)
Ang mga multiwalled carbon nanotubes (MWCNTs) ay mga tubular na materyal na grapaytiko na mayroong pambihirang mekanikal, termal, at elektrikal na katangian. Sa pag-aaral na ito, isang polymer matrix na binubuo ng chitosan at citric acid (CS-CA) na may iba't ibang konsentrasyon ng MWCNT (0%, 0.05%, 0.5%, at 5% w/v) ang ginawa upang suriin ang epekto ng dami ng MWCNT sa mga katangiang pisikal at kemikal sa nabuong nanocomposite films (plastik ang uri) at coatings. Sinuri ang pagkakalat at katatagan sa pamamagitan ng biswal na inspeksyon at ultraviolet-visible (UV-Vis) spectrophotometry. Bagama't nagpakita ng paghiwalay ng MWCNT sa 0.05% MWCNT solusyon sa paglipas ng panahon, nakabuo pa rin ito ng magkauri at buo na film matapos ang pagpapatuyo. Sa kabilang banda, ang 0.5% solusyon ay nanatiling maayos ang pagkakalat at pagkatatag, habang ang 5% na pormulasyon ay nagresulta sa isang siksik, malutong, at parang electrode na bloke, na may potensyal bilang alternatibo sa glassy carbon electrode. Ang mga nagawang film at pinahiran na telang cotton ay sinuri gamit ang infrared spectroscopy (ATR-FTIR), scanning electron microscopy na may energy-dispersive X-ray spectroscopy (SEM-EDX), at water contact angle (WCA) measurements, na nagpatunay ng matagumpay na pagsasama ng MWCNT at nagpahayag ng mga pagbabagong morpolohikal na nakadepende sa konsentrasyon ng MWCNT. Pinag-aralan din ang electromagnetic interference (EMI) shielding effectiveness ng mga pinahiran na telang cotton gamit ang Vector Network Analyzer (VNA) sa frequency ng 10 MHz hanggang 2 GHz. Ipinakita ng washing durability tests ang halos 80% na pagpapanatili ng masa pagkatapos ng paulit-ulit na paghuhugas, na nagpapahiwatig ng matibay na pagdikit ng coating sa tela. Sa kabuuan, ipinapakita ng pag-aaral na ito ang potensyal ng CS-CA/MWCNT nanocomposites bilang sustainable at biocompatible na materyales na inihanda sa pamamagitan ng isang-hakbang paglusaw at crosslinking procedure ng chitosan gamit ang citric acid. Binibigyang-diin ng mga natuklasang ito ang kahalagahan ng pag-optimisa ng konsentrasyon ng MWCNT at kalidad ng pagkalat upang makamit ang nais na mga katangian ng materyal, habang nagbibigay ng mga rekomendasyon para sa pagpapabuti ng proseso sa hinaharap.
Abstract Format
html
Language
English
Format
Electronic
Keywords
Chitosan; Carbon nanotubes; Citric acid; Crosslinking (Polymerization); Coatings
Recommended Citation
Campos, A. O., & De Guzman, J. C. (2026). Chitosan crosslinked with citric acid (CS-CA)/multi-walled carbon nanotubes (MWCNTs) as a multifunctional coating for different substrates. Retrieved from https://animorepository.dlsu.edu.ph/etdb_chem/84
Upload Full Text
wf_yes
Embargo Period
9-19-2026